Sku:
Barcode:
Availability: In stock (982 items)
Product type:
Vendor: XIDIBEI
$22.98
Pressure range: -1~100bar (optional)
Accuracy: 1%F.S., 0.5%F.S.
Supply voltage: 9-36VDC, other(5V,12V)
Output: 4-20mA, other(0-10V,0.5-4.5V)
Operating temperature: -40~100℃
Compensation temperature: -20~80℃
Operating Current: ≤3mA
Temperature drift (zero & sensitivity): ≤±0.03%FS/℃
Long-term stability: ≤±0.2%FS/year
Response Time: ≤3ms
Overload pressure: 150%FS
Burst pressure: 300%FS
Cycle life: 500,000 times
Pressure connection: 7/16-20UNF male
Electrical connection: Packard connection
Housing Material: 304 Stainless steel
Water-proof level: IP65
Explosion-proof level: ExiaⅡCT6
Weight: 0.12kg
Medium: non-corrosive environment
Sensor core: Al2O3-96% ceramic sensor
Cable length: 0.3m for Packard, 0.5m for plastic direct cable by default
1. Prevent the sensor from contacting with corrosive or overheated media, and prevent dross from depositing in the conduit;
2. When measuring liquid pressure, the pressure tap should be opened on the side of the process pipeline to avoid sedimentation and accumulation of slag;
3. When measuring gas pressure, the pressure tap should be opened at the top of the process pipeline, and the transmitter should also be installed on the upper part of the process pipeline, so that the accumulated liquid can be easily injected into the process pipeline;
4. The pressure guiding pipe should be installed in a place with small temperature fluctuations;
5. When measuring steam or other high-temperature media, it is necessary to connect a condenser such as a buffer pipe (coil), and the working temperature of the sensor should not exceed the limit;
6. When freezing occurs in winter, anti-freezing measures must be taken for the transmitter installed outdoors to prevent the liquid in the pressure port from expanding due to freezing and causing damage to the sensor;
7. When measuring the liquid pressure, the installation position of the transmitter should avoid the impact of the liquid (water hammer phenomenon), so as to avoid the sensor from being damaged by over pressure;
8. Do not touch the diaphragm with hard objects on the sensor probe, as it will damage the diaphragm;
9. When wiring, ensure that the pins are defined, and no short circuit occurs, which may easily lead to circuit damage;
10. Do not use a voltage higher than 36V on the sensor, which may easily cause damage. (The 5-12V specification cannot have an instantaneous voltage higher than 16V)
11. Make sure that the electrical plug is installed in place. Pass the cable through the waterproof joint or flexible tube and tighten the sealing nut to prevent rainwater from leaking into the transmitter housing through the cable.
12. When measuring steam or other high-temperature media, in order to connect the transmitter and the pipe together, a heat dissipation pipe should be used, and the pressure on the pipe should be used to transmit to the sensor. When the measured medium is water vapor, an appropriate amount of water should be injected into the cooling pipe to prevent the superheated steam from directly contacting the transmitter and causing damage to the sensor.
13. In the process of pressure transmission, some points should be paid attention to: there should be no air leakage at the connection between the transmitter and the cooling pipe; be careful when opening the valve, so as not to directly impact the measured medium and damage the sensor diaphragm; the pipeline must be kept unblocked, Prevent deposits in the pipe from popping out and damaging the sensor diaphragm.
Q: Is there any stock? A: Yes, we have finished and semi-finished products in stock, samples can be ready to ship after the assemble and calibration.
Q: How to track my order? A: You will be informed the tracking information by email or online after the sensors are sent.
Q: How about the warranty ? A: Usually 1.5 years, and lifetime maintenance. If any exceptional, we will let you know in advance before you order.
Q: How about after-sales service? A : We are 24 hours online, if you have any problem,pls contact us directly, Whatsapp:+86-13262672787Email:info@xdbsensor.com
Q: Any discount? A: For bulk purchase or distribution agents, we will apply for the best price for you, and if we have any promotions, we will post in store and send you an email to inform you.
Q: How is the price? A: As a matter of fact, the quality is related to the price. What we can do is that our prices are the best and most competitive based on the same quality. And they are with the highest performance ratio.
Q: Could you provide me the shortest lead time? A: We have raw materials in stock for most products, if you have the urgent requirement, pls let us know and we will strive to satisfy you well.
Q: Could I visit your factory? A: Of course, welcome to our factories when you are convenient.
Q: Can you accept ODM & OEM service ? A: Yes, ODM & OEM are no problem. Please let us know your requirement in details.
Q: What kind of products do you offer ? A: XIDIBEI develops and manufactures reliable, high quality standard pressure sensors, pressure transmitters, differential pressure transmitters, pressure switches pressure control, temperature control devices offering innovative solutions and components able to outfit at best machines and production systems and give a single answer to any requirements in pressure control systems.
Q: Are you manufacturer ? A: Yes, we are a professional manufacturer of sensors and transmitters with 2 factories.
Q: Is this product suitable for all media? A: According to different application environments, we can provide different solutions, so the more detailed parameters you supply, the more suitable solutions you will get.
Q:Is the identity information we provide on your platform guaranteed? A:Of course, we have customer privacy terms, please refer to: Privacy Policy
Wishlist is empty.